Fluke 87V Industrial Multimeter

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument

Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks

Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models

True RMS AC voltage and current for accurate measurements on non linear signals

Selectable filter for accurate voltage and frequency measurements on motor drives

SKU: AREAS-489

Mô tả

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument

Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks

Large digit display with bright, two-level backlight makes the 87V significantly easier to read than older models

True RMS AC voltage and current for accurate measurements on non linear signals

Selectable filter for accurate voltage and frequency measurements on motor drives

0.05% DC accuracy

6000 counts, 3-3/4 digits

4-1/2 digit mode for precise measurements (20,000 counts)

Measure up to 1000 VAC and DC

Measure up to 10 A, 20 A for up to 30 seconds

Built in thermometer lets you carry one less tool (TC probe included)

Frequency to 200 kHz and % duty cycle

Resistance, continuity and diode test

10,000 µF capacitance range for components and motor caps

Min/Max-Average recording with Min/Max Alert to capture variations automatically

Peak capture to record transients as fast as 250 µs

Relative mode to remove test lead interference from low ohms measurements

Auto and manual ranging for maximum flexibility

Touch Hold to capture stable readings avoiding noisy signals

Large display digits and two-level bright white backlight for increased visibility

Analog bargraph for fast changing or unstable signals

Input Alert provides audible warning against wrong use of input jacks

Improved selectable sleep mode for long battery life

Access door for fast battery changes without breaking the calibration seal

“Classic” design with new removable holster with built in test lead and probe storage

Lifetime warranty

Specifications
Voltage DC Maximum voltage 1000 V
Accuracy ±(0.05% + 1)
Maximum resolution 10 µV
Voltage AC Maximum voltage 1000 V
Accuracy ±(0.7% + 2) True RMS
AC bandwidth 20 kHz with low pass filter; 3 db @ 1 kHz
Maximum resolution 0.1 mV
Current DC Maximum amps 10 A (20 A for 30 seconds maximum)
Amps accuracy ±(0.2% + 2)
Maximum resolution 0.01 µA
Current AC Maximum amps 10 A (20 A for 30 seconds maximum)
Amps accuracy ±(1.0% + 2) True RMS
Maximum resolution 0.1 µA
Resistance Maximum resistance 50 MΩ
Accuracy ±(0.2% + 1)
Maximum resolution 0.1 Ω
Capacitance Maximum capacitance 9,999 µF
accuracy ±(1% + 2)
Maximum resolution 0.01 nF
Frequency Maximum frequency 200 kHz
Accuracy ±(0.005% + 1)
Maximum resolution 0.01 Hz
Duty cycle Maximum duty cycle 99.9%
Accuracy ±(0.2% per khz + 0.1%)
Maximum resolution 0.1%
Temperature measurement –200.0°C – 1090°C
–328.0°F – 1994.0°F
excluding probe
80 BK temperature probe –40.0°C – 260°C
–40.0°F – 500°F, 2.2°C or 2% whichever is greater
Conductance Maximum conductance 60.00 nS
Accuracy ±(1.0% + 10)
Maximum resolution 0.01 nS
Diode Range 3 V
Resolution 1 mV
Accuracy ±(2% + 1)
Duty cycle range Accuracy Within ±(0.2% per kHz + 0.1%)
Environmental Specifications
Operating temperature –20°C to + 55°C
Storage temperature –40°C to + 60°C
Humidity (without condensation) 0% – 90% (0°C – 35°C)
0% – 70% (35°C – 55°C)
Operating Altitude 2000 m
Safety Specifications
Overvoltage category EN 61010–1 to 1000 V CAT III, 600V CAT IV
Agency approvals UL, CSA, TÜV, VDE listed
Mechanical and General Specifications
Size 201 x 98 x 52 mm (with holster)
Weight 355 g
624 g – with holster
Display Digital 6000 counts updates 4/sec.
19,999 counts in high–resolution mode
Analog 32 segments, updates 40/sec
Frequency 19,999 counts, updates 3/sec at > 10 Hz
Warranty Lifetime
Battery Life Alkaline ~400 hours typical, without backlight
Shock 1 Meter drop per IEC 61010–1:2001
Vibration Per MIL–PRF–28800 for a Class 2 instrument

Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “Fluke 87V Industrial Multimeter”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Title

Go to Top